alien pull test

Lost gear? Selling? Donating? Questions?

Moderators: chossmonkey, Dom, granite_grrl

alien pull test

Postby Adam » Mon Nov 05, 2007 3:40 pm

http://www.youtube.com/watch?v=cj-vwEYMAS8
http://www.youtube.com/watch?v=2BPyniSqeBc&NR=1

not sure if this is a certified test or not but it's convincing! :)
User avatar
Adam
 
Posts: 1105
Joined: Mon Apr 02, 2007 8:39 pm

Re: alien pull test

Postby The Mitt » Tue Nov 06, 2007 1:39 pm

That doesn't mean crap to me. The company is run by a dick, there have been so many quality assurance mistakes why take the risk. Great design crap company.

Mitt
User avatar
The Mitt
 
Posts: 847
Joined: Sun Dec 12, 2004 5:22 pm
Location: Prospect NS

Re: alien pull test

Postby Adam » Tue Nov 06, 2007 5:11 pm

yup, it's hit or miss whether you have a good one... but if you do you're set!
User avatar
Adam
 
Posts: 1105
Joined: Mon Apr 02, 2007 8:39 pm

Re: alien pull test

Postby The Mitt » Tue Nov 06, 2007 6:40 pm

Sure, but how do you know for sure you got a good set? a bad braze can hold a couple hundred pounds but won't hold even a small fall. Also why support a guy who knows he is selling a potentially dangerous product but took 3 more accidents before he did anything about it? Even blamed one of the accidents on the guy who fell saying it was a fraud. Then his QA (quality assurance) is so bad there was a fourth bad cam reported.

The best thing that can happen is no one buy his cams he hits chapter 11 and a reputable company buys the design from him.

Mitt
User avatar
The Mitt
 
Posts: 847
Joined: Sun Dec 12, 2004 5:22 pm
Location: Prospect NS

Re: alien pull test

Postby Shawn B » Wed Nov 07, 2007 9:35 am

I've got a set and I "think" I trust them. They are old though...before the quality issues started. Would I make a 3 piece gear anchor out of Aliens only....hmmm...prob not unless it was the only option. I'm waiting for the new Metolius cams to come out next spring. I think they'll be the cat's @$$...and from a good solid company.
Safety third!!!
Shawn B
 
Posts: 439
Joined: Tue Apr 19, 2005 1:36 pm

Re: alien pull test

Postby Adam » Wed Nov 07, 2007 10:03 am

you bounce test them.
User avatar
Adam
 
Posts: 1105
Joined: Mon Apr 02, 2007 8:39 pm

Re: alien pull test

Postby Fred » Wed Nov 07, 2007 10:12 am

aside from cams breaking and people dying am I the only one who thinks the design is terrible? I find them so limp it's like trying to push a rope up the wall...
I want to go to hell... there's probably lots of rock to climb there.
User avatar
Fred
Site Admin
 
Posts: 3140
Joined: Wed Oct 20, 2004 12:30 am
Location: Fredericton, NB

Re: alien pull test

Postby The Mitt » Wed Nov 07, 2007 11:06 am

trad_reborn wrote:you bounce test them.


Bounce test? Hows that for a factor 1.5 fall or more? That is probably one of the most unreliable ways to test if a piece is good or not. Maybe OK for a placement but not a piece of gear. The only way to know for sure is send it to an indepandant lab for a pull test. That would probably cost as much as the piece.

M
User avatar
The Mitt
 
Posts: 847
Joined: Sun Dec 12, 2004 5:22 pm
Location: Prospect NS

Re: alien pull test

Postby Adam » Wed Nov 07, 2007 11:36 am

The Mitt wrote:That is probably one of the most unreliable ways to test if a piece is good or not.


what's your reference on that?

a static bounce test puts a tonne of force on the piece... much more than you realize. the stretch in the rope reduces the forces immensely.

i'm no expert, just speaking from experience.
User avatar
Adam
 
Posts: 1105
Joined: Mon Apr 02, 2007 8:39 pm

Re: alien pull test

Postby granite_grrl » Wed Nov 07, 2007 1:13 pm

trad_reborn wrote:
The Mitt wrote:That is probably one of the most unreliable ways to test if a piece is good or not.


what's your reference on that?

a static bounce test puts a tonne of force on the piece... much more than you realize. the stretch in the rope reduces the forces immensely.

i'm no expert, just speaking from experience.


So you don't know how much force a bounce test will put on a cam either....yet you are telling people its an adequate test? Nice to meet you Kettle.

The majority of Aliens are rated to 12kN. BD supposedly pull tests all their gear to half their rated strength. Perhaps a bounce test could get close to 6kN, but that does seem rather high.

Nope, I don't have the date either about how much force a bounce test generates. But the end result is that I don't feel like I should have to test all my own gear to verify that it's safe. To me the onus should remain on the manufacturer.

I agree about the new Metolius cams coming out. I've heard that they look pretty sweet!
User avatar
granite_grrl
 
Posts: 925
Joined: Wed Oct 27, 2004 2:56 pm
Location: St. Catharines, ON

Re: alien pull test

Postby chossmonkey » Wed Nov 07, 2007 1:17 pm

trad_reborn wrote:
The Mitt wrote:That is probably one of the most unreliable ways to test if a piece is good or not.


what's your reference on that?

a static bounce test puts a tonne of force on the piece... much more than you realize. the stretch in the rope reduces the forces immensely.

i'm no expert, just speaking from experience.



Clip a screamer between the piece and your aiders and bounce away. Let us know if you can generate the 500 pounds needed to activate it.

My bet is no.

On the off chance you can get it to start ripping, attach another (in parallel) so it will be 1000 pounds. If you can get that to start ripping then you are on your way to a reasonable test.
If women ruled the world there would be no wars, just be a bunch of jealous countries not talking to each other.
User avatar
chossmonkey
 
Posts: 1243
Joined: Mon Nov 13, 2006 4:11 pm
Location: Running a muck.

Re: alien pull test

Postby Burley » Wed Nov 07, 2007 3:46 pm

1kn = 225 lbs of force

Depending on your weight I think you can get close to 2kn of force with a bounce test.

Force Calculator:
http://www.myoan.net/climbart/climbforcecal.html

Here is what I read once... and found it again...
"A dynamic climbing rope must be designed to absorb enough energy so that the maximum force on an 80 kg. (180 lb.) climber in a factor 2 fall is not more than 12 kn. (2698 lb.). The maximum force on a top anchor could approach 19.9 kN or 4475 lbs."

http://www.southeastclimbing.com/faq/fa ... .htm#climb
http://www.southeastclimbing.com/faq/faq_kilonewton.htm
Burley
 
Posts: 270
Joined: Mon Feb 27, 2006 1:37 pm
Location: Fredericton

Re: alien pull test

Postby The Mitt » Wed Nov 07, 2007 5:30 pm

trad_reborn wrote:
The Mitt wrote:That is probably one of the most unreliable ways to test if a piece is good or not.


what's your reference on that?


Common sense, force calculator, experience, many websites and books (supertopo, RC.com, how to climb aid) you pick.

trad_reborn wrote:a static bounce test puts a tonne of force on the piece... much more than you realize. the stretch in the rope reduces the forces immensely.

i'm no expert, just speaking from experience.


No your wrong again, a static bounce test does not put a tonne (2k pounds) on a piece unless your much heavier than the average human. You might get 800-1000 pounds if your lucky. This still may be held by a bad braze. Notice I said "may" because no-one knows how much a bad braze will hold (Russ Walling reported that one Alien he tested broke at 900 pounds). So you bounce test get 750 pounds (arbitrary number) on the gear but it breaks at 1500 (arbitrary number). Good test? I don't think so. I to am not an expert and my numbers may be off by allot, but I am not giving advice for testing suspect gear.

So how to do test at home? The answer is you don't cause you probably don't have the expertise or equipment. If you read RC.com people discuss dumbass ideas like pull on it with your car or use a vice and a come-along. Now how do you know you didn't just break your piece that your testing, how do you measure the force you put on it?

So your stuck with climbing on them or not. Your choice and your risk assessment. Telling people that bounce testing them is OK is just dangerous.

I don't use them but I really like the design. I think its important that people learn as much as they can about CCH Aliens and make up their own minds. I personally don't trust them and don't use them.

Mitt
User avatar
The Mitt
 
Posts: 847
Joined: Sun Dec 12, 2004 5:22 pm
Location: Prospect NS

Re: alien pull test

Postby chossmonkey » Wed Nov 07, 2007 6:28 pm

The Mitt wrote:
So how to do test at home? The answer is you don't cause you probably don't have the expertise or equipment. If you read RC.com people discuss dumbass ideas like pull on it with your car or use a vice and a come-along. Now how do you know you didn't just break your piece that your testing, how do you measure the force you put on it?


With Screamers you could measure pretty closely how much weight you put on it. You would need several loaded together (parallel) to get to a reasonable force before the stitching starts to rip. Yates Screamers reliably deploy at around 500 pounds. Three should get you to 1500. With a come-along you could slowly apply force until the first stitch or two blows on each. Unweight and test the next with the same Screamers, they shouldn't start to rip again until you get back up to whatever force you are testing to. If you only rip a few stitches testing one or two units the Screamers should still be okay to use as they were intended on manky gear.



Unless someone weights 250 pounds I still think it would be pretty tough to get to 500 pounds with a simple bounce test. You'd need to start taking short falls onto the piece and at that point you'd likely start hurting yourself.
If women ruled the world there would be no wars, just be a bunch of jealous countries not talking to each other.
User avatar
chossmonkey
 
Posts: 1243
Joined: Mon Nov 13, 2006 4:11 pm
Location: Running a muck.

Re: alien pull test

Postby chossmonkey » Wed Nov 07, 2007 6:30 pm

Not that I would climb on them anyway. :lol:
If women ruled the world there would be no wars, just be a bunch of jealous countries not talking to each other.
User avatar
chossmonkey
 
Posts: 1243
Joined: Mon Nov 13, 2006 4:11 pm
Location: Running a muck.

Re: alien pull test

Postby Adam » Thu Nov 08, 2007 12:22 am

chill out there hurricanes

i never said that a bounce test will mean that it is free of defects, i meant it is adequate for me (plus having taken falls on them) and meant the colloquial 'tonne' not literal. that should probably have been inferred from the 'i'm no expert' part. 8) static pulls are violent but no, aren't equal to a f2 fall unless you drop a large weight, which doesn't necessarily have to involve dropping a human's weight :shock:
User avatar
Adam
 
Posts: 1105
Joined: Mon Apr 02, 2007 8:39 pm

Re: alien pull test

Postby STeveA » Thu Nov 08, 2007 8:33 am

Force from a bounce test is about 1.2 Kn or 270 lbs.
You are, therefore I am. That is the question....
User avatar
STeveA
 
Posts: 570
Joined: Thu May 26, 2005 9:07 am

Re: alien pull test

Postby Adam » Thu Nov 08, 2007 11:36 am

moreover, i actually meant this kind of bounce test :wink:
User avatar
Adam
 
Posts: 1105
Joined: Mon Apr 02, 2007 8:39 pm

Re: alien pull test

Postby Matt Peck » Fri Nov 09, 2007 8:27 am

Adam you dog
You can't take the sky from me.
User avatar
Matt Peck
 
Posts: 574
Joined: Mon Nov 15, 2004 2:47 pm
Location: Nova Scotia

Re: alien pull test

Postby martha » Fri Nov 09, 2007 9:05 am

:roll:
The phrase "working mother" is redundant. ~Jane Sellman

If a husband speaks in the woods, and his wife is not there to hear him...is he still wrong?
martha
 
Posts: 2105
Joined: Wed Oct 20, 2004 9:40 am
Location: planning the next climbing trip....

Re: alien pull test

Postby Burley » Fri Nov 09, 2007 10:42 am

Bounce test doesn't tell you much... other than will this fail (gear or rock) under my body weight?... force produced is too small. I think Steve and I are using the same math for the force from a bounce test... kn = (climber weight+gear) x 1.5 / 225.

I'm sure your bang on Steve. Whether the force from a bounce test is 1.2 or 1.8 doesn't matter all that much to me. My weight produces less than 1kn of force and me bouncing would be closer to 1.2 than 2, but a 220 lb person with 10lbs of gear that does a serious bounce test can get close to 2... My math shows 1.6... that's close to 2. I wanted to error on the high side of the force produced when I said 2kn... I do understand the physics behind force a bit... I only wanted to show that a bounce test isn't going to get you close to 6kn... or the force of a normal fall (reasonable fall)... which I think is around 6kn. We can get all crazy in and say "that the force calculator doesn't take into account slack, friction, the belay, and blah blah"... I say What is important is that a bounce test on a placement won't get you close to the force of a fall when you have 35 feet of rope out and fall 5 feet above your gear.

I'm not an engineer, but my calculator works.
Burley
 
Posts: 270
Joined: Mon Feb 27, 2006 1:37 pm
Location: Fredericton

Re: alien pull test

Postby *Chris* » Fri Nov 09, 2007 11:03 am

A question...
If you're serious about a home-made test of your aliens I wonder if there's a few things you could do to increase the force produced from a typical static bounce? For instance, how about

1) rigging several climbers together on a single bounce. (the holly-bag comes to mind)

2) setting up the test such that you take advantage of predictable force multiplication that occurrs in anchors built from pieces separated by large angles?

3) bouncing off of a z-pulley system built from static materials
User avatar
*Chris*
 
Posts: 848
Joined: Wed Apr 19, 2006 2:32 pm
Location: Fredericton

Re: alien pull test

Postby The Mitt » Fri Nov 09, 2007 12:16 pm

I don't think I would test at home. most tests that could be done with the gear I have may be more destructive than a valid test.

I would suggest the rule for all other gear applies. If in doubt throw it out. Why place a piece of gear that you think in the back of your mind may not have been built properly?

M
User avatar
The Mitt
 
Posts: 847
Joined: Sun Dec 12, 2004 5:22 pm
Location: Prospect NS

Re: alien pull test

Postby Holly Reid » Fri Nov 09, 2007 12:45 pm

*Chris* wrote: 1) rigging several climbers together on a single bounce. (the holly-bag comes to mind)

HAHAHAHAHA :D
Holly Reid
 
Posts: 84
Joined: Tue Nov 15, 2005 11:01 pm
Location: Nova Scotia

Re: alien pull test

Postby Makwizard » Wed Oct 15, 2008 11:28 am

I am currently conducting research at Duke University to analyze and redesign cam lobes. The end goal is to improve a cam's ability to hold in soft rock and flaring cracks. I have just begun my research but will be continually posting updates of my findings on my cam research page.

Thanks.
Check out my homepage
Makwizard
 
Posts: 5
Joined: Tue Sep 02, 2008 6:58 pm


Return to Gear

Who is online

Users browsing this forum: No registered users and 1 guest

cron